Used
Riverstone RS 38000 Router
The
Pre-Owned RS 38000 is Riverstone's high density metro
aggregation router. It is an established leader among
metro-focused high-density routers, combining powerful
service creation tools, dynamic bandwidth provisioning,
and a connection-oriented data collection architecture.
The 38000 can aggregate or deliver these services over
a complete range of optical and legacy network interfaces,
including GbE, MPLS-enabled GbE, Fast Ethernet, CWDM,
Channelized DS3, Packet over SONET/SDH OC48c, MPLS-enabled
Packet over SONET/SDH OC48c/OC12c/OC3c and ATM E3/DS3/OC3c/OC12c
interface. |
 |
The
Used Riverstone 38000 is ideally suited to serve as an MPLS
Label Edge Router (LER) or Label Switch Router (LSR), and
sits at the critical juncture for extending metro VPN services
over a nationwide ATM or MPLS backbone. The Refurbished Riverstone
38000 is NEBS compliant and features fully redundant processors,
switch fabrics, and power supplies, along with a standards-based
implementation of the Virtual Router Redundancy Protocol (VRRP).
Overall, the RS 38000 makes the perfect fit for service creation
in the most demanding and highest density environments found
in today's Metro networks. Also, the used riverstone RS3000
and RS8000 switches available.
Key Applications:
- Aggregate Ethernet, TDM and ATM traffic from metro networks,
supports POS/SDH OC-48c uplinks to the Internet core in
a single, carrier-class platform
- Create or hand off MPLS/Ethernet VPNs, Transparent LAN Services,
or Virtual Leased Lines, across an MPLS or ATM core
- Creates cost-effective CWDM/Ethernet metro backhaul or regional
transport networks between access rings, POPs, and data centers
Used
Riverstone RS 8000/8600
The
Used Riverstone RS 8000 and 8600 are high-performance,
all-purpose metro routers. Among the most recognized
and highly deployed router platforms in the metro, the
8000 and 8600 combine powerful service creation capabilities
with a full range of optical and copper interfaces in
a compact, NEBS-compliant platform.
The Used Riverstone
RS 8000 and 8600 provide an ideal service-provisioning
platform for service providers in the metro, with powerful
service creation tools like Riverstone's metro-optimized
MPLS Layer 2 or 3 tunneling technology, dynamic bandwidth
provisioning, and connection-oriented data collection
architecture. |
 |
The
RS 8000 and RS 8600 Refurbished Riverstone are best known
for their ability to deliver services over the full range
of networks found in the metro, including TDM, RPR, Packet
over SONET/SDH, ATM and Gigabit Ethernet. The RS 8000 and
8600 already serve as trusted platforms in a diverse range
of metro deployments, from Metro Ethernet Aggregation and
high-density access to broadband aggregation and content injection,
and even as part of class-5 switch replacement solutions in
the Telco central office. Overall, RS 8000/8600 routers are
an established, trusted choice wherever the need for IP intelligence
is found.
Key Applications:
- Aggregation of access and data center traffic
- On-demand bandwidth provisioning using hardware-based rate
limiting technology with kilobit resolution
- Create MPLS VPN, virtual leased line, or Transparent LAN
services as an MPLS Label Edge Router
- Aggregate TDM or Ethernet traffic and uplink with Packet
over SONET/SDH, ATM, or Gigabit Ethernet
Used
Riverstone RS 1000/3000
| The
Used Riverstone RS 1000/ RS 3000 are Riverstone's metro
access routers. Among the most highly deployed access
platforms in the metro, they extend IP service delivery
to the metro access edge, featuring Riverstone's metro-optimized
MPLS services, full function routing and switching,
and dynamic bandwidth provisioning with a connection-oriented
data collection architecture. At the same time, the
1000/3000's combination of a compact form factor and
high port density saves operational costs and improves
service provider margins. |
 |
The
key to the platform's popularity is its unique ability to
deliver Layer 3/2 services to the access edge over either
existing TDM or ATM networks or available dark fiber. Service
providers have deployed the RS 1000 or 3000 to extend the
reach of a Metro Ethernet deployment to customers with last-mile
TDM access, to offer VLAN-based Transparent LAN services over
a wide-area ATM network, refurbished riverstone or to simply
provide fast Ethernet access with Gigabit uplinks. Both the
Used Refurbished Pre-owned Riverstone RS 1000 and RS 3000
design feature two flexible media slots that accommodate Gigabit
Ethernet, WAN, ATM and Packet over SONET/SDH interfaces.
Key Applications:
- Extending services to the metro access edge
- On-demand bandwidth provisioning using hardware-based rate
limiting technology with kilobit resolution
- Creating MPLS/Ethernet VPNs, Transparent LAN services, or
Virtual Leased Lines at the access edge
- Delivering services over copper or optical infrastructure
- Gigabit and 10/100 Ethernet, T1/E1, T3/E3, ATM, and DWDM
Used Riverstone ES 10170 Switch
The
Used Riverstone ES 10170 is a new generation of Ethernet
aggregation Layer-3 switch designed for wiring closets
and Carrier data centers. The Refurbished Riverstone
ES 10170 can deliver 448 Fast Ethernet + 4 Gigabit Ethernet
or 60 Gigabit Ethernet ports at wire-speed in a modular
chassis occupying only 5 rack units.
This high port
density helps save rack space and can decrease operational
complexity by reducing the number of deployed network
elements. The refurbished modular chassis is designed
for growth - the ES 10170 can be deployed with as few
as 64 Fast Ethernet and 4 Gigabit Ethernet ports, and
is expandable up to 448 Fast Ethernet ports or 60 Gigabit
Ethernet ports. |
 |
In
addition, the Used Riverstone Networks ES 10170 allows network
capacity to scale further by supporting 8 Gigabit trunked
links over CWDM optical fiber connections.The refurbished
Riverstone ES 10170 features full-function hardware-based
switching & routing capabilities. It also has an unmatched
range of features such as packet filtering, rate limiting,
prioritization and accounting which combine to give pinpoint
bandwidth control and monitoring. In addition, a full suite
of server load balancing features allows the Used Riverstone
ES 10170 to provide the switching engine for web and e-commerce
server farms. Equipped with the same reliability and redundancy
features normally found in a carrier-class network, the Used
Riverstone ES 10170 is ideally suited for the most demanding
points in a business's mission-critical network.
Key Applications:
- High Availability L2/L3 LAN Core Switch - Full function
routing with carrier class reliability for non stop mission-critical
environments
- High Density Wiring Closet Switch - 448 Fast Ethernet +
4 Gigabit Ethernet or 60 Gigabit Ethernet ports in 5 rack
units
- Highly Reliable and Resilient Server Farm Switch - hardware
load balancing and full redundancy features such as HPS and
VRRP
Used Riverstone ES 500 Switch
| The
used Riverstone ES 500 is designed specifically as a
service provider edge-access solution for Metropolitan
Area Networks. It allows service providers to deliver
value-added, Ethernet-based services efficiently and
cost effectively. The used riverstone ES 500 provides
high performance IP services in a 1-rack unit (RU) form
factor with 24 10/100 Ethernet ports, 2 Gigabit Ethernet
uplink ports, and dual redundant power supplies. |
 |
The
refurbished Riverstone ES 500 is the ideal cost-effective
platform to deliver profitable Metro Area Network services
to the customer premise. It provides a rich set of Layer 2
and Layer 3 services including wire speed rate limiting, VLANs,
routing, and Access Control Lists (ACLs).
Key Applications:
- On-demand bandwidth provisioning using hardware-based rate
limiting for scalable Ethernet access services
- Support for VLANs, routing, and Layer 2 filters to provide
secure VPN and Transparent LAN services to the customer premise
More
Riverstone Information:
The
Used Riverstone RS 8000 and Used Riverstone 8600 switch
routers combine wire-speed multi-layer switching and routing
with fully integrated LAN/WAN capability, pinpoint control
of bandwidth and application flows, and superior routing
table capacity for high performance. Like all RS switch
routers, the Used Riverstone RS 8000 and Used Riverstone
8600 are proven to maintain wire-speed layer 2, 3, and 4
switching and routing performance with all features enabled.
Prioritization, filtering and Quality of Service (QoS) policies
can be extended across the entire network to allocate appropriate
resources to groups of users or specific applications. These
feature-rich application-aware platforms enable bit-level
control of bandwidth and are optimized for establishing
and policing Service Level Agreements (SLAs).
Key Applications:
-
Aggregating traffic in managed services data centers or
collocation cages
-
Aggregating access from multiple IP transport technologies
in POPs
-
Lighting up multi-tenant buildings and selling bandwidth
by the bit.
Used Riverstone 8000 / Used Riverstone 8600 Solutions Challenge:
Solution:
Effectively manage bandwidth-hungry applications Wire-speed
application control including rate limiting, prioritization,
redirection, load balancing and defining service level agreements
(SLAs)
Achieve maximum network uptime Redundant hardware support,
standards-based virtual router redundancy protocol (VRRP)
and self-healing route paths (OSPF multipath, MLPPP and
Smart Trunking)
Seamless integration of legacy and emerging backbone media
Industry
leading WAN connectivity including ATM, POS and Serial/Frame
Relay
Need for integrated Accounting, Authentication and Authorization
(AAA)
Used Riverstone 2 and Used Riverstone 4 Port Packet Over SONET/SDH Modules:
Used Riverstone RS 8000/Used Riverstone 8600 Chassis
The refurbished Riverstone Networks' Packet Over SONET (POS)
modules provide the critical high-speed interconnection
of POPs to SONET networks in a seamless fashion. The Used
Riverstone OC-3c and Used Riverstone OC-12c POS modules
extend the WAN portfolio of the Used Riverstone RS 8600
and Used Riverstone 8000 family, now the most complete in
the industry.
SONET/SDH based networks have been adopted by Service Providers
as the backbone technology of choice for addressing ever-increasing
bandwidth demands. Packet Over SONET/SDH interfaces for
the RS switch router provide increased redundancy, bandwidth
utilization and capacity. With the POS interfaces, all the
benefits of the RS switch router are extended to the SONET
infrastructure. Access Control List (ACL)-based filtering,
Layer 4 application-aware switching, QoS and Server Load
Balancing are integrated into the base module. Features
* High-speed Packet Over SONET (POS) OC-3c, Used Riverstone
OC-12c interfaces provide a cost-effective, high-performance
backbone network for Service Providers.
Key Applications:
-
Supports high port density with 2-port OC-12c and 4-port
OC-3c configurations including redundancy using 1+1 Automatic
Protection Switching
-
Supports both SONET and SDH modes with industry standard
PPP over SONET/SDH (RFC 1619) and PPP in HDLC-like Framing
(RFC 1662) protocol support
-
IP-based Weighted Fair Queuing (WFQ), Weighted Random
Early Discard (WRED) and Rate Limiting features provide
effective congestion management tools for Service Providers
Used Riverstone OC-12c
ATM Module: Used Riverstone RS 8000 / Used
Riverstone 8600 Chassis
The Used Riverstone OC-12c module for the Used Riverstone
RS 8000 and Used Riverstone RS 8600 platforms is one of
the highest performing ATM uplinks in the industry. The
feature rich module supports a huge number of VCs up to
64K. Automatic Protection Switching on the module ensures
link level redundancy. The refurbished Riverstone OC-12c
module supports PPP over ATM allowing a large number of
DSL circuits to be terminated. With the support for PPP
authentication, using PAP/CHAP with Radius and other servers
makes this an attractive alternative to the dedicated and
expensive solutions in the market. With ATM OC-12c modules
installed, the RS 8x00 platform becomes the industry’s
highest density PPP termination platform. Coupled with subscriber
management services including Radius and TACACS+ support,
the RS 8x00 becomes the highest performance DSL aggregation
platform.
The Used Riverstone OC-12c module provides a large pipe
for connecting networks of switch routers through an ATM
cloud. For the metro service providers this powerful Used
Riverstone OC-12c module could bridge the ATM and gigabit
Ethernet infrastructures. ISPs could connect to their next
tier ISPs using this ATM module. Used Riverstone ATM OC-12c
module could be used in the core for aggregating multiple
edge switches connected using smaller ATM connections. For
DSL networks, Used Riverstone OC-12c module could terminate
a large number of circuits from CPE devices using PPP over
ATM, RFC 1483 bridged or routed encapsulations.
Key Applications:
-
High performance ATM module inter connects GigE and ATM
infrastructure at wirespeed
-
Supports a large number of VCs, up to 64K per module
-
Industry’s highest density PPP over ATM with authentication
for terminating 32K PPP sessions per module
-
Turns the RS 8x00 into a DSL service aggregation platform
-
Automatic Protection Switching provides link redundancy
-
On board processor and high performance SAR provide line
rate performance
-
Supports 1483 bridged and routed encapsulations
-
Provides per VC shaping
-
Uniquely maps IP QoS to ATM using VC groups providing
end to end QoS support
Used Riverstone 2 Port Gigabit
Ethernet SX and Used Riverstone LX Modules:
Used Riverstone RS 8000 / Used Riverstone
8600 Chassis
Riverstone
Networks' next-generation Gigabit Ethernet modules for the
Used Riverstone RS 8000 and Used Riverstone 8600 switch
router chassis provide two port 1000 Base-SX or 1000 Base-LX
connectivity through SC connectors. These modules are ideal
for high-speed connectivity in Service Provider environments
where high-performance and full-featured capabilities are
a requirement. Riverstone's advanced architecture enhances
overall network performance by eliminating bottlenecks caused
by a single central processor. All refurbished Riverstone from Genesis Global is of the highest quality.
The unique capabilities of the Gigabit Ethernet modules'
architecture are Hardware Rate Limiting (HRL), Local Hardware
Route Table (LHRT) and Jumbo Frame support. These features
are well suited to address the aggressive needs of Service
Providers. Also, the Riverstone GIC-17 GBICs can implement
this. HRL includes Port Rate Limiting and Aggregate Rate
Limiting which are ideal for Application, Content and Multi-Tenant-Unit
Service Providers. These environments require the ability
to set up and manage a large number of new connections per
second. A Local Hardware Route Table (LHRT) enables routing
tables to be stored locally on the modules which enhances
the connection set up time compared to cache-based routers.
Jumbo Frames extend the Ethernet payload size which in turn
increases throughput for content providers.
|
